Interior and Modular Furniture Solutions from Our Bommanahalli Workshop

Most furniture that reaches a Bengaluru office or home has passed through two or three hands before it arrives. A trader takes the order, a fabricator somewhere builds it, and a third party installs it. When something is wrong — a carcass 15 mm too wide for the alcove, a shutter that binds, a laminate that does not match the sample — nobody in that chain can fix it quickly, because nobody in that chain actually made it.

We work differently. Sri Ranga Interior Modular Furnitures runs its own workshop at #336/10, Hosur Road, near ICICI Bank, Bommanahalli. The drawing, the cutting, the edge banding, the assembly and the site installation all sit under one roof and one set of people. That single fact changes what we can promise you.

What being the manufacturer actually changes

Site measurements drive the cut list. We do not adapt your room to a catalogue size. Once the site is measured, the panel sizes are set from those numbers. Bengaluru buildings are rarely square, and a 20 mm scribe allowance decided at the drawing stage is what stops a gap appearing along a wall six weeks later.

Changes cost time, not a new order. If you decide mid-project that a wardrobe needs three drawers instead of two, that is a revision to a cut list, not a fresh purchase order routed through a supplier.

Repairs and additions stay possible. Because we hold the drawings and the hardware specification, adding a matching unit two years later is straightforward. Furniture bought through a reseller usually cannot be extended at all once the original batch is gone.

What we build

Our work spans both residential and commercial projects:

• Modular kitchens — base and wall units, tall units, and internal accessories planned around how the kitchen is actually cooked in
• Wardrobes and storage — hinged and sliding, with internal layouts set to what you own
• Office interiors and workstations — panel-based and open-desk systems, cabins, reception areas and meeting rooms
• Custom furniture manufacturing — pieces built to your drawing or ours when nothing standard fits
• Space planning and renovation — layout work before any furniture is committed to
• Turnkey interior fit-outs — a single point of responsibility from concept through handover

How a project usually runs

We start with a site visit and measurement. From there we produce a layout and a specification: board type, finish, hardware, and the exact dimensions of every unit. You sign off on that before anything is cut. Production happens at Bommanahalli, and our own team handles delivery and installation, which means the people fitting the furniture understand how it was built.

Talk to us before you finalise a layout

The cheapest time to solve a furniture problem is on paper. If you are planning a home interior or an office fit-out anywhere in Bengaluru, call +91 98860 03777 or write to info@srirangainterior.com, and bring your floor plan — we would rather look at it early than work around a decision that has already been made.